Specification of Digital Lens Drilling NHC-3G

• Power:  50W
• Drilling Speed: 0-5000 RPM
• The Drilling Bits’ eccentricity tolerance: 0.03mm
• X-axis moving range ( Max ): 155mm
• X-axis moving rated Load: 50kg
• Y-axis moving range (Max): 28mm
• Y-axis moving rated Load : 30kg
• Clutch suction force (Max): 1.5kg
• Resolution of the Encoder: Less than 0.07mm
• Clamping Capacity of the Clamp: ≥0.7KG
• Dimension: 302 X 228X 270 mm
• Weight: 5 kg

Main Functions
• The operation procedures are highly intelligent and totally digital.
• Compared to the hole position of the pattern lenses, it has higher process accuracy whose process deviation is less than 0.075mm in both X-axis and Y-axis.
• It has auto position clamping equipment which allows to remain the same process accuracy after the change of clamps.
• The screen shows the drill position and coordinates data, and gives guidance to the operation.
• The hole position memory function allows to process the set hole positions continuously.
• There're two measure modes to choose which are original pattern measure mode and frame position measure mode.
• It has mirroring mode in the process.
• The head can automatically reposition if it's removed from its position accidently.
• The instrument drills automatically in a set order, and can be corrected by pressing the number button if any hole is missed by wrong operations.